Heat treated 10/32 screws with protective washers included
Stackable outer case design
Made from recycled materials
G-PRO-4U-19
Contact Your Online CRM Rep Today For Ordering Details
IC-LIVE The Ideal System For Multiple Applications
Adobe Flash Player not installed or older than 9.0.115!
Adaptable, Articulate, Invisible
Digital beam steering puts IC Live output where it belongs: on the audience, not walls or ceilings.
Computer software lets you define the opening angles for as many as four sonic beams from each IC Live array module (up to 8 beams when stacked) and aim them up or down. Meanwhile, the slim enclosure stays vertical and inconspicuous.
Two ICL-R modules can be stacked for even tighter control and higher output.
Powerful, Accurate, Musical
Iconyx transparent technology controls sound with DSP intelligence, not cumbersome brute-force techniques. Multi-channel class D digital amplifiers with Integral DSP engines control every single array element with programmable precision.
High-current audiophile output stages power each light, efficient transducer in the Iconyx array individually. Even at 100 feet, SPL is an impressive105 dB (108 dB when stacked). Output is flat from 80 Hz to 20 kHz.
Low frequency energy can be extended to 40 Hz or below with matching subwoofers.
Applications • Corporate Events • Live Concerts • Political Rallies • Theatrical Productions. • Museums: lobbies, galleries, etc. • Resorts, Theme Parks • Any environment where enjoyable music and/or intelligible speech are critical
Portable, Scalable, Versatile
Iconyx IC Live arrays are engineered for portable applications, with a comprehensive hardware system that makes setup simple.
Two IC Live arrays can be combined for added output and control. When full range musical output is important to the program, one or two IC215-S dual 15-inch subwoofers can be added to either array.
The subwoofers can act as tall or wide bases for IC Live arrays using the interlocking hardware system.
One-Touch Presets, Intuitive Software
RHAON empowered IC Live arrays provide a full set of remote control and supervision functions, along< with the ability to store up to ten preset configurations in memory.
The presets adapt the arrays 150° wide horizontal coverage for typical applications such as hotel meeting rooms or auditoriums.
For more complex situations, Iconyx BeamWare software makes it easy to shape the array’s coverage to the audience area.
Contact Your Online CRM Rep Today For Ordering Details
Protect your Gear the Right Way!
Now Available at Online CRM:
The SurgeX SX2120 provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment.
SX2120 surge eliminators are 20-amp load-capable and have 14 industrial grade grounded AC receptacles (2 switched banks of 6; 2 always on) plus a front-panel courtesy receptacle.
The SEQ provides guaranteed surge protection, power conditioning and sequencing for audio, video, broadcast and computer equipment.
A double rack-space unit, the SEQ features two always-on receptacles and four programmable banks. There are three physical banks of four receptacles each and a fourth ‘virtual’ bank for controlling remote units, allowing for infinitely expanding power distribution schemes.
The SX1120RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.
Switched receptacles can be controlled with an applied voltage (5-30 vdc) or contact closure switch connected to the Phoenix connector on the back panel. The connector can also be used to cascade multiple units or provide status to a central controller.
The SX1120RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 20-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched, 2 always on) plus a front panel courtesy receptacle.
The SX1115RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.
Switched receptacles can be controlled with an applied voltage (5-30 vdc) or contact closure switch connected to the Phoenix connector on the back panel. The connector can also be used to cascade multiple units or provide status to a central controller.
The SX1115RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 15-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched, 2 always on) plus a front panel courtesy receptacle.
The SurgeX SX1115RL is designed for broadcast/recording studios, custom design/build installations and sound reinforcement applications. It has front panel connectors and a dimmer control for 2 Littlite® gooseneck lamps.
The SX1115RL provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 15-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched, 2 always on).
The SurgeX SX1115 provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment.
The units are 15-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched; 2 always on) plus a front-panel courtesy receptacle.
The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution. >> more >>
The SurgeX SX20NE provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment.
SX20 NE units are 20-amp load-capable, 10" x 8" x 4" NEMA enclosures and meet code for use at the service entrance, sub-panels and in ceiling plenums.
The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.
The SurgeX SX20 NE/RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.
The unit can be controlled with an applied voltage (5-30 vdc) or a contact closure switch connected to the Phoenix connector terminal block. The connector can also be used to cascade multiple units or provide status to a central controller.
The SX20 NE/RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 20-amp load-capable, 12" x 12" x 4" NEMA enclosures and meet code for use at the service entrance, sub-panels and in ceiling plenums.
The SurgeX SXN240 provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment.
The unit comes in a 12" x 12" x 4" NEMA enclosure and meets code for use at the service entrance, sub-panels and in ceiling plenums. The SXN240 is 20-amp load capable, and has two surge suppression modules, one for each 120-volt leg.
The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.
The SXN1240 provides guaranteed surge protection for dedicated power lines. The unit comes in a 12" x 12" x 4" NEMA enclosure and meets code for use in ceiling plenums.
The SXN1240 is 20-amp load capable and is specifically designed for international use in 240 volt systems with single-phase power requirements. The standard model has one surge suppression module.
The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.
The SurgeX Powerframe 420 provides guaranteed surge protection and power condition-ing for audio, video, broadcast and computer equipment. Powerframe 420 units are compact 80 Amp load centers for multi-branch circuit applications. They offer four independent 20 Amp circuits in a 16" x 12" x 4" magnetic shielding NEMA enclosure and meet code for use at the service entrance, sub-panels and in ceiling plenums.
The SA966 and SA1810 provide guaranteed surge protection for audio, video, broadcast, computer and all sensitive electronic equipment.
These units are rated for 8 amps (SA966) and 15 amps (SA1810) and feature industrial grade grounded AC receptacles. When fitted with the optional mounting brackets these standalone units easily mount where you need them.
SurgeX Series Mode technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.
The SA15 and SA20 are specifically designed to upgrade and improve surge protection for audio, video, broadcast, computer and all sensitive electronic equipment.
When fitted with the optional mounting brackets these standalone units easily mount where you need them. The SA-15 is rated for 15 amps and SA-20 for 20 amps, and both have two industrial grade grounded AC receptacles. The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution.
SurgeX Advanced Series Mode technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. Our zero let-through technology provides the most reliable protection available. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.
Specifically Designed To Protect Flat Panel Monitors
The SA82 provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 8-amp load-capable and have 2 industrial grade grounded AC receptacles.
The SA82 utilizes our patented Series Mode® surge protection technology, Impedance Tolerant® EMI/RFI filtering and Over-Voltage-Shutdown which automatically restores power when line voltage returns to a safe level. The unit’s compact design can be easily integrated with today’s Flat Panel monitor mounting systems. The FlatPak™ SA82 is available in both black and silver finishes, comes with a detachable IEC power cord and universal mounting brackets.
SurgeX ICE Inrush Current Elimination technology provides soft turn-on to prevent inrush current problems associated with high ampacity multi-component systems.
Both the ICE 20C and ICE 20H provide remote system control, making magnetic time-delay circuit breakers and their associated installation requirements unnecessary. In addition, ICE inrush current eliminators include Impedance Tolerant EMI/RFI filtering for premium power conditioning.
Made from recycled materials
